| Renewing Night Cream | |||
|---|---|---|---|
| Phase | Ingredient | Functions | % |
| A | AC-8329 (Cetyl PEG/PPG-10/1 Dimethicone) | Emulsifier | 1.50 |
| AC-2093 (C13-15 Alkane (and) Dimethicone/Vinyl Dimethicone Crosspolymer) | Sensory enhancer, lubricious feel and hydrating | 10.00 | |
| AC-2 cSt (Dimethicone) | Emollient | 5.00 | |
| optiphen™ (Phenoxyethanol (and) Caprylyl Glycol) | Preservative | 1.00 | |
| Night Lavender - Dierberger Fragrance | Parfum | 0.20 | |
| B | Aqua | Vehicle | 75.20 |
| EDTA | Chelating Agent | 0.10 | |
| Glycerin | Humectant | 5.00 | |
| Sodium Chloride | Stabilizer | 1.00 | |
| RonaCare® JouvaMer (Water (and) Pelvetia Canaliculata Extract (and) Benzyl Alcohol (and) Dehydroacetic Acid) | Anti-aging active | 1.00 | |
| Process 1. Mix the ingredients of Phase A until completely homogeneous. 2. Mix ingredients of Phase B. 3. Add very slowly Phase B to Phase A while stirring at high speed (~1600 rpm). 4. Homogenize at 6000 rpm for 5 minutes. Features Water in silicone cream providing anti-aging effect to the skin with a lubricating and moisturizing sensation at night. |
|||
| Water Burst Moisturizer | |||
|---|---|---|---|
| Phase | Ingredient | Functions | % |
| A | AC-8330 (Dimethicone (and) PEG/PPG-19/19 Dimethicone/Vinyl Dimethicone Crosspolymer) (and) PEG-10 Dimethicone) | Emulsifier | 3.50 |
| AC-10 cSt (Dimethicone) | Emollient | 10.00 | |
| AC-1501 (Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer) | Sensory modifier | 5.00 | |
| B | Aqua | Vehicle | To 100 |
| Glycerin | Humectant | 40.00 | |
| Sodium Hyaluronate | Skin hydrating agent | 3.00 | |
| Sodium Chloride | Stabilizer | 1.00 | |
| C | Preservative | Preservative | q.s. |
| D | Fragrance | Parfum | q.s. |
| Process 1. Weigh the ingredients of Phase A and mix at 800 rpm for 30 minutes. 2. Weigh the ingredients of Phase B and mix until homogeneous. 3. Add Phase B to Phase A while mixing at 2500 rpm for 15 minutes. 4. Add Phase C and Phase D with mixing. Features Translucent moisturizer with superior sensory and refreshing water-burst effect and lasting hydration. |
|||
| Anti-aging Retinol Serum | |||
|---|---|---|---|
| Phase | Ingredient | Functions | % |
| A | AC-5156 (Cyclopentasiloxane (and) Cyclohexasiloxane) | Emollient | 20.00 |
| AC-1302 (Dimethicone (and) Dimethiconol) | Protective barrier | 70.50 | |
| B | C12-15 Alkyl Benzoate | Solubilizer | 9.00 |
| AccessCARE RET-STB 30NT | Promote collagen production | 0.50 | |
| Process 1. Add Phase A ingredients in order, use high-speed mixing and blend for 10 minutes until uniform and fully dispersed. 2. In a separate container, combine all Phase B ingredients, mix gently until uniform. Slowly add Phase B into Phase A while continuing mixing, heat the batch to 55–60°C and maintain mixing for 20 minutes to ensure full solubilization and stability of the retinol complex. 3. Allow the batch to cool to 40°C with continuous gentle stirring. Optionally, apply low shear mixing or homogenization for 10–15 minutes to ensure a smooth, air-free serum texture. Features This advanced silicone-based retinol serum delivers a silky-smooth finish while promoting collagen production, visibly reducing fine lines and improving skin texture without irritation. |
|||